This Laser Wheel and Axle Alignment Gauge features FAST Chassis setup and cordless battery power. Get your Toe In and Toe Out Readings in less than 2 Minutes. With no wheel alignment head cables or power cords, you get portable, accurate wheel alignments in your home or shop. The Laser Toe Gauge works on all Car and Truck Wheels from 5″ to 28″ and even on UN-Level Surfaces. If you replace a tie rod, strut, or other front end component, there is no faster way (or more accurate) way to get the wheel alignment done than with this tool. Professional auto repair technicians from around the world take advantage of the Laser Toe Gauge.

Additional Features

• Heavy Duty Truck and Trailer Wheel Alignment
• Steer Tires with any wheel size up to 28″ wheels.
• Includes Class 3, 4, 5, 6, 7, and 8 Truck Heavy Duty Wheel Alignment.
• Equipment comes with how-to Instruction Manual, as well as VIDEO Instructions

Request More Info:

Features

• True-rms ac voltage and current for accurate measurements on non-linear signals
• Measure up to 1000 V ac and dc
• Measure up to 10 A (20 A for 30 seconds)
• 10,000 μF capacitance range
• Frequency to 50 kHz
• Built in thermometer conveniently allows you to take temperature readings without carrying a separate instrument
• Resistance, continuity and diode test
• Low power wireless technology allows the display to be carried up to 10 meters (33 ft) away from the point of measurement for added flexibility. No interference with measurements
• The removable magnetic display can be conveniently mounted where it is easily seen
• Make measurements without holding the meter to improve visual focus on probes and augment safe electrical measurements
• Use as a conventional multimeter when the display is connected
• Radio transmitter automatically turns off when the display is connected to the meter
• Auto power off maximizes battery life
• Min/Max and Average recording to capture variations automatically
• Test continuity and diodes
• Easy to read display with large digits and bright backlight
• Battery life approximately 400 hours

Request More Info:

With the press of a switch you’ll have an instant hot lead or ground lead. Use the hot lead and ground lead simultaneously to activate components right in your hand. Instantly check components for continuity as well as identify positive, negative and open circuits without re-polarizing hook-up clips. Locate shorts without wasting fuses. The 20ft lead will allow you to test bumper to bumper without jumper leads.

Audio tone indicates positive with a high pitched tone and negative by a low pitched tone. The audio feature can be disabled when testing relays! The Power Probe III has 2 cool white LED’S that flood the work area with bright light. The housing is sleek and feels great in your hand.

Request More Info:

The fact is that if you replace a PCM, WCM, or SKIM Module, you will have to have the security code or the vehicle won’t start. All 5.9 Dodge Cummins that have reprogramming service done will go into a no start after service is performed. You will need to reprogram the anti theft system before the vehicle will start, and of course if your customer loses their keys you will need to access the security codes for reprogramming.

Reprogram multiple vehicles in record time without the internet. DMAX is your cost effective solution for key reprogramming. Coverage from 1998-present including phobic keys.

Request More Info:

The ISCAN II features a proprietary automotive platform enabling it to boot-up instantly making navigation and connection to modules easy! With the ISCAN II there is no need to enter VIN numbers, you simply select the make, model, and system along with the function and you’re there LIVE!

Autoland Scientech’s ISCAN II provides in-depth coverage that you need in order to quickly diagnose problems in European, Asian and Domestic vehicles saving you time and money! With the ISCAN II you’re able to accomplish much more than just read and clear codes. The ISCAN II gives technicians far more access to factory capabilities like flashing, programming, activations, component relearning, and much, much more!

As a professional technician you know how important it is to properly test and diagnose the vehicle when using the ISCANN II, you’ll see how FAST and EASY it is to diagnose the entire vehicle systems. So don’t be left stranded in the middle of a repair because you don’t have the write tool for the job. Even performing simple services like throttle body cleaning or rotating tires, you will need a quality scan tool.

Combine all this with the utilization of Bluetooth technology allowing technicians to connect wirelessly to a PC and control the ISCAN II from up to 330 feet. You truly have the only Scan tool you will ever need!

• EVAP and Emission problems
• ABS Service issues
• ANTI Theft Systems Changing engine computers
• Reset service reminders including European
• Under car Systems traction alignment tpms

Request More Info:

Technicians can easily preselect the make/model/year using the menu system.  Data can be displayed on the large backlit screen or transferred to a PC to print out an audit of the car to show the customer.  This tool displays the replacement part number and service kit as well as the other data available including: sensor ID, PSI, battery status, temperature and advises the user if the wrong TPMS has been fitted.  The TECH400 Plus works with all cars on the market.

• Launched with OBD software for Toyota, Nissan, Hyundai and Kia
• Software updateable using a standard USB cable to a PC for all vehicle makes and models
• Comes complete with integral rechargeable batteries in a molded carrying case with a USB cable, magnet (for older model sensors), protective rubber boot, user guide and recharge PSU

Request More Info:

Simply insert the steel shaft into a cordless, electric or air powered drill and pull the trigger to clean, polish and remove debris or corrosion inside valve bores, blind holes, tubing and virtually any other hard to reach surface in just a few seconds.  Wash the brush with soap and water and it will be ready for your next job.

Each nylon bristle of the patent-pending bench buddy brushes are impregnated with a super fine abrasive that works in wet or dry applications and designed for frequent and repeated use.

The patent pending Bench Buddy™ brushes are a must for any toolbox with 100’s of time and money saving uses.  This tool is your best buddy when it comes to cleaning components on cars, trucks, SUV’s, motorcycles, ATV’s, automatic transmissions, lawn and garden equipment, small engine, and boat and marine engines.

“Where has the Bench Buddy™ been all my life? I can’t believe that it wasn’t invented sooner.”
- Lee Thompson – Autopro Service & Repair

Request More Info:

The 388 model features the new Intell-a-Purge™ air purge system and automatic oil refill. This machine also has automatic oil purge and vacuum leak test and heated power charging.  The Clima/CS provides audible notification when service is complete or when the filter or vacuum pump oil needs changed. After each service, a printout is provided of refrigerant recovered, oil recovered, oil charged, refrigerant charged and time vacuumed. This machine is also easily moved around your shop and has stay put locking front wheels.

Request More Info:

Using cutting-edge infrared refrigerant gas analysis technology and Neutronics’ Exclusive Blend ID™ software, it can correctly identify EPA S.N.A.P. approved refrigerants as well as R12, R134a, R22, hydrocarbons and Air. The Ultima ID® is also capable of identifying illegal replacements and blends such as butane and propane and determines if the purity levels of R12 and R134a refrigerant are at the industry standard levels.

Request More Info:

The system is easy to use and includes everything you need including: A/C coupler, hose, syringe, ten test cartridges and flow meter. All of the components of the system are reusable, with the exception of the disposable test cartridges which are available separately in low cost 25 piece packs.

Request More Info: